Xem mã nguồn của Bản mẫu:Infobox Australian road/doc

Bạn không được quyền sửa đổi trang này, vì lý do sau:

Dải địa chỉ IP này đã bị cấm trên toàn hệ thống.
Điều này không làm ảnh hưởng đến khả năng đọc các trang Wikipedia của bạn.

Hầu hết những người nhìn thấy thông báo này không làm gì sai. Một số tác vụ cấm hạn chế sửa đổi từ những nhà cung cấp dịch vụ hoặc công ty viễn thông cụ thể do lạm dụng hoặc phá hoại gần đây, ảnh hưởng tới những thành viên khác không liên quan đến sự lạm dụng ấy. Xem bên dưới nếu bạn tin rằng bạn không làm gì sai.

Lệnh cấm này ảnh hưởng trên tất cả wiki của Wikimedia.

Địa chỉ IP hoặc dải IP 139.180.192.0/19 đã bị cấm toàn cục bởi ‪Jon Kolbert‬ vì (những) lý do sau:

Open proxy/Webhost: See the help page if you are affected

Lệnh cấm này có hiệu lực từ 14:08, ngày 13 tháng 11 năm 2023 và sẽ hết hạn vào 14:08, ngày 13 tháng 11 năm 2026. Địa chỉ IP hiện tại của bạn là 139.180.211.105.

Ngay cả khi bị cấm, bạn thường vẫn có thể sửa đổi trang tại Meta-Wiki.

Nếu bạn cho rằng mình đã bị cấm do nhầm lẫn, bạn có thể xem thêm thông tin và hướng dẫn bỏ cấm trên trang này.

Các liên kết hữu ích khác: Cấm toàn cục · Trợ giúp:Tôi bị cấm

Bạn vẫn có thể xem và sao chép mã nguồn của trang này.

{{Trang con tài liệu}}<!-- XIN HÃY THÊM THỂ LOẠI VÀO PHÍA DƯỚI TRANG NÀY. --><!-- Để bổ sung liên kết liên wiki, hãy ghé vào Wikidata. -->== Cách sử dụng =={{tl|Infobox Australian road}} is the standard infobox used in Australian articles. Australian articles using {{tl|Infobox road}} should be converted to use this infobox as it contains additional functionality, including that of {{tl|Infobox street}} and {{tl|Infobox road junction}}. Code exists for implementation of {{tl|Infobox road small}} functionality if that is deemed to be necessary. See [[Template talk:Infobox Australian road/Archive 2#Infobox Australian road small|this discussion]] for more information.=== To use this template ===#Copy the relevant blank template from the <u>'''[[Template:Infobox Australian road/Blank|Blank infobox template page]]'''</u> into the beginning of your document, remembering to put the code at the very top of the article and the first word of the article on the very next line. For road junctions, use the reduced parameter set at [[Template:Infobox Australian road/Blank#Road junctions]].# Enter values for the parameters as outlined in the [[Template:Infobox Australian road#Fields|table below]]. Fields left blank will automatically be hidden.# Preview.# Save the page with an appropriate edit summary.=== Examples ===* Examples of this template can found on the [[Template:Infobox Australian road/Examples|examples page]].== Parameters ==All parameters used by this template are optional, except for {{para|type}}. Some parameters require others to be completed in order to display data correctly. The following are available:{| class="wikitable plainrowheaders" style="background-color: white;"! scope="col" style="background-color: whitesmoke;" | Parameter! scope="col" style="background-color: whitesmoke;" | Description! scope="col" style="background-color: whitesmoke;" | Source/notes! scope="col" style="background-color: whitesmoke;" | Values|-| scope="row" | {{anchor|type}} type| type of road| '''Required parameter.''' Sets up the template for a specific type of road or road junction.| "highway", "road", "rural road", "street", "expressway", "freeway", "motorway", "parkway", "track" or "junction"|-| scope="row" | urban| | If the road is wholly contained within an urban area, set {{para|urban|yes}}.| "yes" or empty|-| scope="row" | jtype| type of junction| Type of road junction. See {{cl|Road junction types}} for examples.| wikitext (can contain links)|-| scope="row" | status<br />&nbsp;''or''<br />uc_former| road status| Status of the road for use in limited circumstances. Only use when the road is under construction, proposed or has been closed.| Under construction: "uc" or "under construction"<br />Proposed: "proposed"<br />Closed: "closed"|-| scope="row" | road_name| name of road| Primary name used for road| plain text, do not wikilink|-| scope="row" | road_name2| alternative name| Alternative name(s) for road| plain text, do not wikilink. When there is more than one name, separate them with a solidus ( / ). If there are more than two names, use {{tl|Plainlist}}|-| scope="row" | city| location of the road| Place where the road is located. This should be as detailed as is necessary. For road junctions, this will typically be a suburb.| wikitext (can contain links)|-| scope="row" | state| rowspan="2" | state where the road is located| Use the 2 or 3 digit state code corresponding to the location used for <code>direction_a</code> and <code>end_a</code>. It will automatically be converted to the full state name and wikilinked. If the road passes through more than one state, use <code>state2</code> for the "other end" of the road.| rowspan="2" | "qld", "nsw", "act", "vic", "tas", "sa", "wa", "nt" or "jbt". <!-- These are actually case insensitve but let's specify lowercase for consistency and ease of management by automatic means. -->|-| scope="row" | state2| If the road passes through only one state, this parameter will not be used. When it is used, use the 2 or 3 digit state code corresponding to the location used for <code>direction_b</code> and <code>end_b</code>. It will automatically be converted to the full state name and wikilinked.|-| scope="row" | route_image| rowspan="2" | route shield/box| rowspan="2" | See ''[[:commons:Category:Route shields of Australia|here]]'' for a list of shields| rowspan="3" | image filename without "File:"|-| scope="row" | route_image2-8|-| scope="row" | photo| generic image of the road| |-| scope="row" | photosize| width of photo| This is an optional parameter, generally used for images with portrait orientation. If not specified, image width defaults to 270px| numeric value, should not be greater than 300|-| scope="row" | caption| image caption| a caption for the image| rowspan="2" | wikitext (can contain links)|-| scope="row" | photo_alt| alt text| [[MOS:ALT|Alt text]] for the image|-| scope="row" | location| location map image| a map showing the location of the road. See [[:File:Location Pacific Hwy.svg|this example]]. See ''[[:commons:Category:Highways in Australia|here]]'' for a list of map images. If an image is not available, the locator map function may be used to provide the reader with an indication of the road's general location.| image filename without "File:"|-| scope="row" | loc_caption| location map caption| a caption for the location map| rowspan="2" | wikitext (can contain links)|-| scope="row" | location_alt| alt text| [[MOS:ALT|Alt text]] for the location map|-| scope="row" | alternative_location_map| rowspan="4" | locator map| Forces the locator map to use an alternative, rather than the state map, regardless of the contents of <code>state</code>.| Name of the alternative map|-| scope="row" | force_national_map| Forces the locator map to use the Australian, rather than the state map, regardless of the contents of <code>state</code>.| rowspan="3" | "yes" or leave blank, plain text, do not link <!-- Anything in this field will force the Australian map to be used. For consistency though, let's force people to use something simple and obvious. -->|-| scope="row" | use_lga_map| Forces the locator map to use the lga map. For this to work, both <code>state</code> and <code>lga</code> must be set, with only one value in each.|-| scope="row" | relief| forces the locator map to use the relief version of the map. For an example of the relief map used in an infobox, see [[Top End]].|-| scope="row" | coordinates| road coordinates| {{UF-coord}}<br />If the locator map function is being used, this may be omitted, as the template generates the {{tl|coord}} string from the locator map parameters, in which case this parameter is overridden.| Example:<br /><nowiki>{{Coord|32|45|41.3|S|151|44|38.6|E|type:landmark_region:AU-NSW|display=inline,title}}</nowiki>|-| scope="row" | latd_a<br />latm_a<br />lats_a| end_a latitude| rowspan="2" | <code>coordinates</code> field| rowspan="2" | degrees<br />minutes<br />seconds|-| scope="row" | longd_a<br />longm_a<br />longs_a| end_a longitude|-| scope="row" | pushpin_label_position_a| end_a label position| position of the map label for <code>end_a</code> relative to the pushpin| left, right, top, bottom<br />default: left|-| scope="row" | latd_b<br />latm_b<br />lats_b| end_b latitude| rowspan="2" | <code>coordinates</code> field| rowspan="2" | degrees<br />minutes<br />seconds|-| scope="row" | longd_b<br />longm_b<br />longs_b| end_b longitude|-| scope="row" | pushpin_label_position_b| end_b label position| position of the map label for <code>end_b</code> relative to the pushpin| left, right, top, bottom<br />default: left|-| scope="row" | pushpin_map_caption| caption| a caption for the locator map| optional, wikitext (can contain links)|-| scope="row" | map_alt| alt text| [[MOS:ALT|Alt text]] for the locator map| wikitext (can contain links)|-| scope="row" | length| road length| length of the road in km| unformatted numeric value, will be formatted if length >= 1000.|-| scope="row" | length_rnd| rounding| Primarily for short roads such as [[Mouat Street]].| single integer numeric value|-| scope="row" | length_ref| length reference| reference for the length of the road| properly formatted reference, preferably use {{tl|cite web}}, {{tl|cite news}} or other citation template|-| scope="row" | height| road junction height| height of the road junction in metres| unformatted numeric value, will be formatted if length >= 1000.|-| scope="row" | height_rnd| rounding| | single integer numeric value|-| scope="row" | height_ref| height reference| reference for the height of the road junction| properly formatted reference, preferably use {{tl|cite web}}, {{tl|cite news}} or other citation template|-| scope="row" | spans| number of spans| number of bridge spans at the road junction| number|-| scope="row" | direction_a| rowspan="2" | road direction| direction of one end of the road. For split roads (see further down), instead use <code>direction_a1</code>, <code>direction_a2</code> and <code>direction_a3</code>| rowspan="2" | plain text, "North", "South", "East", "West" or, when the direction is not one of these, use an abbreviated version, "NE", "SSW" etc. See [[Cardinal direction]] for advice.|-| scope="row" | direction_b| direction of the other end of the road. For split roads (see further down), instead use <code>direction_b1</code>, <code>direction_b2</code> and <code>direction_b3</code>|-| scope="row" | end_a| rowspan="2" | road end| location of the end of the road. For split roads, instead use <code>end_a1</code>, <code>end_a2</code> and <code>end_a3</code>| rowspan="2" | route shield, wikitext (can contain links)|-| scope="row" | end_b| location of the other end of the road. For split roads, instead use <code>end_b1</code>, <code>end_b2</code> and <code>end_b3</code>|-| scope="row" | est| date opened| date or year that the road was opened| rowspan="2" | plain text|-| scope="row" | closed| date closed| date or year that the road was closed|-| scope="row" | gazetted| gazetted dat| Date the road was [[Gazetteer of Australia|gazetted]]| date|-| scope="row" | gazetted_ref| gazettal reference | Reference for the road's gazettal| properly formatted reference, preferably use {{tl|cite web}}, {{tl|cite news}} or other citation template|-| scope="row" | built_by| construction details| Name of the company or authority that built the road| rowspan="4" | wikitext (can contain links)|-| scope="row" | maintained| maintenance authority| Name of the authority that maintains the road|-| scope="row" | history| route history| brief, significant notes about the road's history that should be expanded upon in the prose, and not be a replacement for it.|-| scope="row" | roads| roads at the junction| List of roads at the road junction. Use {{tl|Plainlist}}|-| scope="row" | route| routes| [[Route number#Australia|route allocation]]| rowspan="3" | route shield, wikitext (can contain links)|-| scope="row" | former| former route information| Information about former route designation, etc.|-| scope="row" | tourist| tourist routes| a list of the tourist routes that follow the road|-| scope="row" | ring| ring road| The name of the locality that the [[ring road]] encircles. If this parameter is defined, it will override <code>tloop</tloop>. When this parameter is used, <code>direction_a</code> and <code>direction_b</code> should not be used.| rowspan="2" | wikitext (can contain links)|-| scope="row" | tloop| tourist loop| The name of the locality that the tourist rad encircles. If <code>ring</code> is defined, it will override this parameter. When this parameter is used, <code>direction_a</code> and <code>direction_b</code> should not be used.|-| scope="row" | split| split road| If the road is split into named sections, set this to a non-null value. When set, it enables parameters listed further down this list used for the individual sections. up to 3 sections may be specified| "yes" or leave blank, plain text, do not link <!-- Anything in this field will force the Australian map to be used. For consistency though, let's force people to use something simple and obvious. -->|-| scope="row" | exits| route| list of major exits/interchanges. For split roads, instead use <code>exits1</code>, <code>exits2</code> and <code>exits3</code>Note: ''Do not'' include a note linking to the full list further down the article. <small>Per the [[Wikipedia:Manual of Style/Infoboxes|Manual of Style for Infoboxes]], this is not the purpose of the infobox – the table of contents provides that function.</small>| route shield, wikitext (can contain links)|-| scope="row" | section1-3| section headings| For split roads with named sections, use <code>section1</code>, <code>section2</code> and <code>section3</code> to specify the names for each of up to 3 sections.| wikitext (can contain links)|-| scope="row" | region| region(s)| region(s) through which the road passes| route shield, wikitext (can contain links)|-| scope="row" | lga| lga(s)| List of LGA(s) through which the road passes. For multiple LGAs, use {{tl|Plainlist}}| rowspan="2" | wikitext (can contain links)|-| scope="row" | through| suburbs/settlements| List of suburbs and other settlements through which the road passes. For multiple locations, use {{tl|Plainlist}}|-| scope="row" | show_links| show highway links?| causes "Highway system" links to be shown at the bottom of the infobox. Is turned on by default when type = "highway", "expressway", "freeway", "motorway", or "parkway", and is usually not used for the other road types.| "yes" or "no" or leave blank (for default behaviour), plain text, do not link|-| scope="row" | show_links2| show additional highway link| causes an additional "Highway system" link to be shown for the specified state or territory, in addition to the links automatically determined from the <code>state</code> and <code>state2</code> parameters. Will have no effect unless the highway links are already shown, either by default or with {{para|show_links|yes}}| "qld", "nsw", "act", "vic", "tas", "sa", "wa", or "nt". <!-- These are actually case insensitve but let's specify lowercase for consistency and ease of management by automatic means. -->|-| scope="row" | restrictions| general restrictions| brief, significant notes about any restrictions on the road, such as regular seasonal closures or permit requirements needed for access. Content here should be expanded upon in the prose, and not be a replacement for it.| wikitext (can contain links)|-| scope="row" | permit| permits required?| If permits are required, include number. Leave blank if not required. Only visible when type=track| plain text|-| scope="row" | fuel| fuel availability| Brief description of fuel availability on the road, only visible when {{para|type|track}}| rowspan="2" | wikitext (can contain links)|-| scope="row" | facilities| facilities available| Brief description of facilities on the road, only visible when {{para|type|track}}|}{{cot|TemplateData}}<templatedata>{ "params": { "status": { "aliases": [ "uc_former" ], "label": "road status", "description": "Only use when the road is under construction, proposed or has been closed. Allowed values: \"uc\" or \"under construction\" or \"proposed\" or \"closed\"", "type": "string" }, "type": { "label": "type of road", "description": "Sets up the template for a specific type of road or road junction. Allowed values are \"highway\", \"road\", \"rural road\", \"street\", \"expressway\", \"freeway\", \"motorway\", \"parkway\", \"track\" or \"junction\"", "type": "string", "required": true }, "road_name": { "aliases": [ "name" ], "label": "name of road", "description": "Primary name used for road (plain text, do not wikilink)", "type": "string", "suggested": true }, "road_name2": { "label": "alternative name", "description": "Alternative name(s) for road. plain text, do not wikilink. When there is more than one name, separate them with a solidus ( / ). If there are more than two names, use {{Plainlist}}" }, "state": { "label": "state where the road is located", "description": "Use the 2 or 3 digit state code corresponding to the location used for direction_a and end_a. If the road passes through more than one state, use the state2 parameter for the \"other end\" of the road. Allowed values: \"qld\", \"nsw\", \"act\", \"vic\", \"tas\", \"sa\", \"wa\", \"nt\" or \"jbt\".", "type": "string", "suggested": true }, "state2": { "label": "state (other end of road)", "description": "If the road passes through more than one state, use the 2 or 3 digit state code corresponding to the location used for direction_b and end_b. Allowed values: \"qld\", \"nsw\", \"act\", \"vic\", \"tas\", \"sa\", \"wa\", \"nt\" or \"jbt\".", "type": "string" }, "route_image": { "label": "route shield/box -- normally not required", "description": "ONLY use for articles about a specific route, NOT for articles about named roads! Specify the image filename (without \"File:\") for the specific route's marker image" }, "route_image2": { "deprecated": "Specify routes in the 'route' parameter" }, "route_image3": { "deprecated": "Specify routes in the 'route' parameter" }, "route_image4": { "deprecated": "Specify routes in the 'route' parameter" }, "route_image5": { "deprecated": "Specify routes in the 'route' parameter" }, "route_image6": { "deprecated": "Specify routes in the 'route' parameter" }, "route_image7": { "deprecated": "Specify routes in the 'route' parameter" }, "route_image8": { "deprecated": "Specify routes in the 'route' parameter" }, "photo": { "label": "photo or road", "description": "generic image of the road. Specify as image filename without \"File:\"" }, "photosize": { "label": "width of photo", "description": "Width of photo in pixels. Optional, generally used for images with portrait orientation. Specify a numeric value less than 300.", "type": "number" }, "photo_alt": { "label": "alt text for photo", "description": "alt text for the photo. See [[MOS:ALT]] for guidance" }, "alt": { "label": "alt text for image", "description": "alt text for photo or location map image", "deprecated": "use photo_alt parameter for photos, or location_alt parameter for location map images" }, "caption": { "label": "photo caption", "description": "a caption for the photo" }, "location": { "label": "location map image", "description": "a map showing the location of the road. Specify an image filename, without \"File:\"" }, "location_alt": { "label": "alt text for location map", "description": "alt text for the location map image. See [[MOS:ALT]] for guidance" }, "loc_caption": { "label": "location map caption", "description": "a caption for the location map, generally of the form \"Map of (somewhere) with (road name) highlighted in (colour)\"" }, "latd_a": { "label": "end_a latitude (degrees)", "description": "degrees component of the end_a latitude" }, "longd_a": { "label": "end_a longitude (degrees)", "description": "degrees component of the end_a longitude" }, "alternative_location_map": { "description": "(locator map parameter) Forces the locator map to use an alternative, rather than the state map, regardless of the contents of 'state' parameter." }, "force_national_map": { "description": "(locator map parameter) Forces the locator map to use an alternative, rather than the state map, regardless of the contents of 'state' parameter." }, "use_lga_map": { "description": "(locator map parameter) Forces the locator map to use the lga map. For this to work, both 'state' and 'lga' parameters must be set, with only one value in each." }, "lga": { "label": "LGA(s)", "description": "LGA(s) through which the road passes. For multiple LGAs, use {{Plainlist}}" }, "relief": { "description": "(locator map parameter) forces the locator map to use the relief version of the map." }, "direction_a": { "label": "direction of one end of road. ", "description": "direction of one end of the road. Specify a plain text direction, such as \"North\", \"South\", \"Northwest\", etc.", "suggested": true }, "latd_b": {}, "latm_a": { "label": "end_a latitude (minutes)", "description": "minutes component of the end_a latitude" }, "lats_a": { "label": "end_a latitude (seconds)", "description": "seconds component of the end_a latitude" }, "longm_a": { "label": "end_a longitude (minutes)", "description": "minutes component of the end_a longitude" }, "longs_a": { "label": "end_a longitude (seconds)", "description": "seconds component of the end_a longitude" }, "pushpin_label_position_a": { "label": "end_a label position", "description": "position of the map label for end_a relative to the pushpin. allowed values: \"left\", \"right\", \"top\", or \"bottom\" (defaults to left)" }, "direction_b": { "label": "direction of other end of road", "description": "direction of the other end of the road. Specify a plain text direction, such as \"North\", \"South\", \"Northwest\", etc.", "suggested": true }, "latm_b": {}, "lats_b": {}, "longd_b": {}, "longm_b": {}, "longs_b": {}, "pushpin_label_position_b": { "label": "end_b label position", "description": "position of the map label for end_b relative to the pushpin. allowed values: \"left\", \"right\", \"top\", or \"bottom\" (defaults to left)" }, "map_alt": { "label": "alt text for locator map", "description": "alt text for the locator map. See [[MOS:ALT]] for guidance" }, "pushpin_map_caption": { "label": "locator map caption", "description": "a caption for the locator map" }, "latitude": {}, "longitude": {}, "coordinates_display": {}, "coordinates": { "label": "road coordinates", "description": "For coordinates: either at the midpoint, or for both ends of the road. Use {{coord}} with display=inline,title. Please do not be overly precise. If the locator map function is being used, this may be omitted, as the template generates the {{coord}} string from the locator map parameters, in which case this parameter is overridden." }, "jtype": { "label": "type of junction", "description": "Type of road junction" }, "city": { "label": "location of the road", "description": "Place where the road is located. This should be as detailed as is necessary. For road junctions, this will typically be a suburb." }, "length": { "label": "road length", "description": "Length of the road in km. Specify an unformatted numeric value", "type": "number" }, "height": { "label": "road junction height", "description": "height of the road junction in metres" }, "direction": {}, "est": { "label": "date opened", "description": "date or year that the road was opened", "suggested": true }, "closed": { "label": "date closed", "description": "date or year that the road was closed" }, "gazetted": { "label": "gazetted date", "description": "Date that the road was gazetted" }, "built_by": { "label": "construction details", "description": "Name of the company or authority that built the road" }, "maintained": { "label": "maintenance authority", "description": "Name of the authority that maintains the road" }, "history": { "label": "brief history", "description": "brief, significant notes about the road's history that should be expanded upon in the prose, and not be a replacement for it." }, "route": { "label": "route number(s)", "description": "route marker image (use {{AUshield}}) AND route number as text (can be a wikilink). Use {{Plainlist}} to specify multiple route allocations.", "suggested": true }, "former": { "label": "former route information", "description": "Information about former route designation, etc." }, "ring": { "label": "ring road", "description": "The name of the locality that the ring road encircles. When this parameter is used, direction_a and direction_b should not be used." }, "tloop": { "label": "tourist loop", "description": "The name of the locality that the tourist road encircles. When this parameter is used, direction_a and direction_b should not be used." }, "tourist": { "label": "tourist routes", "description": "a list of the tourist routes that follow the road" }, "split": {}, "length_rnd": { "label": "length rounding", "description": "Primarily for short roads such as [[Mouat Street]]. Specify a single integer numeric value", "type": "number" }, "length_ref": { "label": "length reference", "description": "reference for the length of the road. <ref> tags required; an existing reference can be reused" }, "height_rnd": { "label": "height rounding", "description": "single integer numeric value" }, "height_ref": { "label": "height reference", "description": "reference for the height of the road junction. <ref> tags required; an existing reference can be reused" }, "spans": { "label": "number of spans", "description": "number of bridge spans at the road junction", "type": "number" }, "gazetted_ref": { "label": "gazettal reference", "description": "Reference for the road's gazettal" }, "roads": { "label": "roads at the junction", "description": "For a road junction, list of roads at the junction. Use {{Plainlist}}" }, "section1": {}, "section2": {}, "section3": {}, "end_a": { "label": "end of road", "description": "intersecting road and location of the end of the road.", "suggested": true }, "exits": { "label": "major exits/intersections", "description": "list of major exits/interchanges. Use {{Plainlist}}", "suggested": true }, "end_b": { "label": "other end of road", "description": "intersecting road and location of the other end of the road.", "suggested": true }, "direction_a1": {}, "end_a1": {}, "exits1": {}, "direction_b1": {}, "end_b1": {}, "direction_a2": {}, "end_a2": {}, "exits2": {}, "direction_b2": {}, "end_b2": {}, "direction_a3": {}, "end_a3": {}, "exits3": {}, "direction_b3": {}, "end_b3": {}, "region": { "label": "region(s)", "description": "region(s) through which the road passes" }, "through": { "label": "suburbs/settlements", "description": "List of suburbs and other settlements through which the road passes." }, "urban": { "label": "in urban area?", "description": "If the road is wholly contained within an urban area, set to \"yes\", otherwise leave blank" }, "restrictions": { "label": "general restrictions", "description": "brief, significant notes about any restrictions on the road, such as regular seasonal closures or permit requirements needed for access. Content here should be expanded upon in the prose, and not be a replacement for it." }, "permit": { "label": "permits required", "description": "If permits are required, include number. Leave blank if not required. Only visible when 'type' parameter is specified as 'track'" }, "fuel": { "label": "fuel availability", "description": "Brief description of fuel availability on the road. Only visible when 'type' parameter is specified as 'track'" }, "facilities": { "label": "facilities available", "description": "Brief description of facilities on the road. Only visible when 'type' parameter is specified as 'track'" }, "show_links": { "label": "show highway links?", "description": "causes \"Highway system\" links to be shown at the bottom of the infobox. Is turned on by default when type = \"highway\", \"expressway\", \"freeway\", \"motorway\", or \"parkway\", and is usually not used for the other road types. Specify \"yes\" or \"no\" or leave blank (for default behaviour)" }, "show_links2": { "label": "show additional highway link", "description": "causes an additional \"Highway system\" link to be shown for the specified state or territory, in addition to the links automatically determined from the 'state' and 'state2' parameters. Will have no effect unless the highway links are already shown, either by default or by setting 'show_links' parameter to 'yes'. Allowed values: \"qld\", \"nsw\", \"act\", \"vic\", \"tas\", \"sa\", \"wa\", or \"nt\"" } }, "description": "An infobox template for Australian road articles.", "paramOrder": [ "type", "urban", "jtype", "status", "road_name", "road_name2", "city", "state", "state2", "route_image", "route_image2", "route_image3", "route_image4", "route_image5", "route_image6", "route_image7", "route_image8", "photo", "photosize", "caption", "photo_alt", "alt", "location", "loc_caption", "location_alt", "alternative_location_map", "force_national_map", "use_lga_map", "relief", "latd_a", "latm_a", "lats_a", "longd_a", "longm_a", "longs_a", "pushpin_label_position_a", "latd_b", "latm_b", "lats_b", "longd_b", "longm_b", "longs_b", "pushpin_label_position_b", "latitude", "longitude", "pushpin_map_caption", "map_alt", "coordinates", "coordinates_display", "est", "closed", "gazetted", "gazetted_ref", "built_by", "maintained", "history", "length", "length_rnd", "length_ref", "height", "height_rnd", "height_ref", "spans", "roads", "route", "former", "tourist", "ring", "tloop", "direction_a", "end_a", "exits", "direction_b", "end_b", "section1", "split", "direction_a1", "end_a1", "exits1", "direction_b1", "end_b1", "direction", "section2", "direction_a2", "end_a2", "exits2", "direction_b2", "end_b2", "section3", "direction_a3", "end_a3", "exits3", "direction_b3", "end_b3", "lga", "region", "through", "restrictions", "permit", "fuel", "facilities", "show_links", "show_links2" ]}</templatedata>{{cob}}== Notes ===== Type ===The infobox type affects the colour of the top bar of the infobox.{| class="wikitable plainrowheaders" style="text-align:center; width:43%;"|-! scope="col" style="padding:0 8px; width:15%;" | Colour<ref group=lower-alpha name=colour>Colour names per [http://www.color-blindness.com/color-name-hue this site]</ref>! scope="col" style="padding:0 8px; width:28%;" | {{para|type}}|-| scope="row" style="background:#e9f9d2; color:#100;" | Snow Flurry (greenish)| highway|-| scope="row" style="background:#ffffe0; color:#100;" | Light Yellow| road, rural road|-.| scope="row" style="background:#f9e2d2; color:#100;" | Antique White| street|-| scope="row" style="background:#d2d5f9; color:#100;" | Lavender| expressway, freeway, motorway, parkway|-| scope="row" style="background:#fee8ab; color:#100;" | Cape Honey (yellowish)| track|-| scope="row" style="background:#f0f0ff; color:#100;" | Ghost White| junction|-| scope="row" style="background:#e6c4fb; color:#100;" | Mauve| Undefined|-! scope="col" style="padding:0 8px; width:19%;" | ! scope="col" style="padding:0 8px; width:7%;" | {{para|status}}, {{para|uc_former}}|-| scope="row" style="background:#fc6; color:#100;" width=10px | Grandis| under construction, uc, proposed|-| scope="row" style="background:#aaa; color:#100;" width=10px | Dark Grey| closed|}{{reflist|group=lower-alpha}}=== "Ref" fields ===Any references should be placed within the respective "_ref" parameter's field and not within the field reserved solely for a numeric value. For example, place the reference used for the length of the road in the {{{length_ref}}} and not in the {{{length}}} parameter. Otherwise, an error may result.=== Unformatted numbers and expression errors ===Certain parameters require numeric values to be entered in an unformatted/raw fashion—i.e. 1000.0 NOT 1,000.0. If an expression error is present, simply remove any commas or spaces from the number.== Deprecated parameter tracking ==Articles that include deprecated parameters are automatically added to {{cl|Australian road articles using deprecated parameters}}.== Subpages ==<!-- * [[Template:Infobox Australian road]]* [[Template:Infobox Australian road/doc]]* [[Template:Infobox Australian road/pagelinks]]* [[Template:Infobox Australian road/sandbox]]* [[Template:Infobox Australian road/sandbox/doc]]* [[Template:Infobox Australian road/testcases]]* [[Template:Infobox Australian road/Testing]]-->{{Special:PrefixIndex/Template:Infobox Australian road}}== Microformat =={{UF--geo}}{{Reflist}}<includeonly>{{#switch:{{SUBPAGENAME}}|sandbox|thử|chỗ thử = |<!-- THỂ LOẠI TẠI ĐÂY, CẢM ƠN. --><!-- Để bổ sung liên kết liên wiki, hãy ghé vào Wikidata. -->[[Thể loại:Bản mẫu hộp thông tin xa lộ|Austra]][[Category:Australia infobox templates]][[Thể loại:Bản mẫu thêm một thể loại theo dõi]]}}</includeonly>

Các bản mẫu dùng trong trang này:

Bản mẫu:Anchor (xem mã nguồn) (khóa kỹ thuật viên bản mẫu)
Bản mẫu:Cl (sửa đổi)
Bản mẫu:Cob (sửa đổi)
Bản mẫu:Collapse bottom (xem mã nguồn) (hạn chế sửa đổi)
Bản mẫu:Collapse top (sửa đổi)
Bản mẫu:Collapse top/styles.css (sửa đổi)
Bản mẫu:Cot (sửa đổi)
Bản mẫu:Có hay không (xem mã nguồn) (khóa kỹ thuật viên bản mẫu)
Bản mẫu:Ifsubst (xem mã nguồn) (khóa xác nhận mở rộng)
Bản mẫu:Liên kết thể loại (sửa đổi)
Bản mẫu:Main other (xem mã nguồn) (bị khóa)
Bản mẫu:Mbox (xem mã nguồn) (bị khóa)
Bản mẫu:Para (xem mã nguồn) (khóa xác nhận mở rộng)
Bản mẫu:Reflist (xem mã nguồn) (khóa kỹ thuật viên bản mẫu)
Bản mẫu:Strong (xem mã nguồn) (khóa kỹ thuật viên bản mẫu)
Bản mẫu:Terminate sentence (sửa đổi)
Bản mẫu:Tham khảo (xem mã nguồn) (bị khóa)
Bản mẫu:Tham khảo/styles.css (xem mã nguồn) (khóa kỹ thuật viên bản mẫu)
Bản mẫu:Thông số (xem mã nguồn) (khóa xác nhận mở rộng)
Bản mẫu:Tl (xem mã nguồn) (bị khóa)
Bản mẫu:Trang con tài liệu (xem mã nguồn) (khóa kỹ thuật viên bản mẫu)
Bản mẫu:UF-coord (sửa đổi)
Bản mẫu:UF--geo (sửa đổi)
Bản mẫu:Yesno (xem mã nguồn) (bị khóa)
Mô đun:Anchor (xem mã nguồn) (khóa kỹ thuật viên bản mẫu)
Mô đun:Arguments (xem mã nguồn) (bị khóa)
Mô đun:Message box (xem mã nguồn) (khóa kỹ thuật viên bản mẫu)
Mô đun:Message box/configuration (xem mã nguồn) (bị khóa)
Mô đun:Message box/ombox.css (sửa đổi)
Mô đun:TableTools (xem mã nguồn) (bị khóa)
Mô đun:Text (xem mã nguồn) (khóa kỹ thuật viên bản mẫu)
Mô đun:Yesno (xem mã nguồn) (bị khóa)

Trở lại Bản mẫu:Infobox Australian road/doc.

Bài viết được in từ nguồn Wiki Scholarship “https://wiki.scholarship.edu.vn/Bản_mẫu:Infobox_Australian_road/doc”